The air leakage of the dust blowing gun is mainly a problem of the sealing valve. The inferior dust blowing gun is often sealed with a plug and an O-ring seal. The advantages are cheap price, high profit, and large sales. Domestic customers are very sensitive to price, quality and price. Often only choose the price.Good size guns are to be air-tight, and they are all double-piston type, and the seals do not use O-rin...

November 13-15, 2016 Zhengzhou International Convention and Exhibition Center (Automobile Exhibition)Booth number: 325 ...

September 13-17, 2016 Frankfurt (Germany) Auto Parts Exhibition Pavilion 10.1 Booth number D72 ...

The working principle and use method of tornado:The tornado produces high-pressure dust blowing through the principle of aerodynamics, and the liquid spray is integrated.It is used for car interior leather, velvet, rubber, plastic, furniture and blankets, gaps, steering wheel, instrument panel, etc., just spray and wipe, when cleaning The image is better and more professional.Working principle --- cleaning should be ...

Maintenance advice1. When you change to a new tire, it is best to do a four-wheel positioning, so as to prevent tire wear is what we usually say to eat tires or edging.2. Check the tire pressure once a month, between 2.2 and 2.8, the coaxial air pressure must be the same, in order to prevent deviation and wear.3. Its okay to pick a stone in the pattern with a hard object. What key, screwdriver, finger, etc. will do.4...

This years economic environment has generally recovered for the pneumatic tool industry, and the demand situation is slightly better. The pneumatic tool industry will continue to operate relatively smoothly at the current lower level, and it is expected to reach a new high.Most of them who have just entered the pneumatic tool seller industry have encountered similar encounters. When facing the huge competition pressu...

Pneumatic tools must be repaired by professionally trained personnel. When using, inspecting, and protecting pneumatic tools, all rules of use must be followed. Do not use dangerous, worn or poor quality compressed air pipes and connectors or fittings. Do not tear off the label on the pneumatic tool and replace any damaged label. Maintain a balanced and stable posture. When using pneumatic tools, do not get too close...

...